Painting Ideas for Kids For Livings Room Canvas for Bedrooms for Begginners art For Kids on Canvas f: Painting Ideas For Living Room Painting Ideas for Kids For Livings Room Canvas for Bedrooms for Begginners art For Kids on Canvas for Home For Walls for Kitchen

Friday 7 March 2014

Painting Ideas For Living Room Painting Ideas for Kids For Livings Room Canvas for Bedrooms for Begginners art For Kids on Canvas for Home For Walls for Kitchen

Painting Ideas For Living Room Biography

source(google.com.pk)

DESCRIPTION : A matt interior paint based on natural and non toxic ingredients. Bio paint

products are made from renewable materials like plant oils, waxes, resins and pigments.

They are gentle to the climate and resources, as well as low odour and low allergenic. The

paint has a pleasant smell and is available in a range of harmonious colours. For use on

interior surfaces such as plasterboard, solid plaster, concrete and mud brick. It is not

recommended for use on timber or on timber products such as medium density fibro board,

masonite or particleboard. Bio Wall Paint breathes, while conventional wall paints seal off

the walls, which can promote mould growth. Bio Wall Paint HD (Heavy Duty) has been tested

by the Department of Defence according to the Australian Standard AS 1580 for scrub-

resistant and dry hiding power. It is therefore well suited for schools, restaurants,

offices and public buildings with heavy traffic areas. Suitable for use in wet areas.

Extreme low Volatile Organic Compounds (VOC) less than 1 gr. Per Litre and does not

contribute to smog and pollution. It contains no lead, glycol derivates, aromatic

hydrocarbons or styrene compounds.

PREPARATION : Prepare the surface in accordance with AS 2311 - Painting of Buildings. The

surface to be painted should be smooth, dry and cleaned of greasy and dirty contaminants.

New plaster and concrete can be painted after 6 weeks. Remove stains, watermarks, soot etc.

seal off with a solution of shellac: 250 grams Shellac per 1 Litre mentholated spirit. Old

lime and kalsomine paint must be removed. Oil based and acrylic paint surfaces – semi gloss

or gloss - should be sanded with sandpaper. A test strip is recommended on already painted

surfaces if compatibility is in doubt.

PRIMING : New, highly absorbent and crumbly surfaces must be primed with BIO Wall Primer.

Alkaline surfaces must be primed first with a special conventional sealer to prevent

saponification of the paint. Plasterboard jointing cement should be left for 48 hours

before painting.

APPLICATION : Stir thoroughly before use with a broad flat stirrer. May be brushed, rolled

or sprayed. Apply one thick coat or two thin coats (may be thinned with water 5%-10% to

obtain a smooth flowing consistency). New Gyprock surfaces need two or three coats

initially. Airless spraying requires 200 bar/pressure with a nozzle of 0.28 mm Titan

-adjustable- or 0.53 mm with a fan angel of 50*-DEEP BASE: For better hiding power use for

the first coat BIO Wall Paint HD white. Followed by 1 to 2 coats of BIO Wall Paint HD Deep

Base. We recommend to use at least 10% pigments in a Deep Base system for better hiding.

Technical Data: Components: Volume solids: 41 % Spreading rate: 8 - 10sqm per Litre

Density: 1.60 Dry Hiding Power: 97.2 Gloss level at 6o/80 degrees 2.3-9.7

DRYING : 2-4 hours at 20-23 C/50-55% Humidity. Fully dry after 4-6 hours. May be recoated

after about 4-6 hours. Allow 7 days for film to fully cure before washing. Under cold and

damp conditions allow a longer drying time. Do not use below + 5 C. Wet film thickness 100

micron, dry film thickness: 41 micron.

COLOURS : Bio Wall Paints are supplied in base white or deep base. Bio Pigments are

available in a range of colours. The customer tints to obtain the required colour, however,

because the tint is not a paint in itself, a maximum of 1 part of tint to 1 part white is

recommended. All tints are intermixable. The standard colours are: Red Blue Violet Orange

Golden Ochre Brown Ochre Yellow Black Green Slight variations between colour lots are

possible. Mixing proportions for 4 Liter white Wall paint: 1:100 1% 40 ml of BIO Pigments

1:50 2% 80 ml of BIO Pigments 1:20 5% 200 ml of BIO Pigments 1:10 10% 400 ml of BIO

Pigments 1:1 50% 2000 ml of BIO Pigments

CLEANING: Use warm, soapy water.

COVERAGE: 1 Liter will covers approx. 8 - 10 sqm. On concrete and rough Surfaces 1 Litre

covers approx. 3-5 sqm. Fire Hazard Indices in accordance with AS 1530.3 Ignition time in

minutes 0 Spread of flame in seconds 0 Heat evolved in kJ/m2 0 Smoke release-non ignited

specimens 3

PACKAGING : White 250 ml, 1, 4 and 10 Litres. Tints 100 ml, 250 ml and 1 Litre.

INGREDIENTS: Castor oil, resins, lemon oil, aluminum silicate, white earth pigments, china

clay, iron oxides, metal pigments, earth pigments, calcium carbonate cellulose, mineral

oil, borax, water, lecithin, etc., free of cadmium, chromates and lead chromates.

STORAGE : Keep tightly sealed in a cool frost free place. Seal well after using. Once

opened, use as quickly as possible. Keep out of the reach of children.

PAINT DISPOSAL: Do not pour left over paint down the drain. Unwanted paint should be

brushed out On newspaper, allowed to dry and then disposed of via domestic waste

collection. Let empty paint Container dry out as well and dispose via recycling program.

The preceding information is given as a general guide only. Some variations may occur or be

advisable for particular conditions. Our responsibility for claims arising from breach of

warranty, negligence or otherwise is limited to the purchase price of the material.